A flight dynamics investigation of compound helicopter configurations

Compounding has often been proposed as a method to increase the maximum speed of the helicopter. There are two common types of compounding known as wing and thrust compounding. Wing compounding offloads the rotor at high speeds delaying the onset of retreating blade stall, hence increasing the maximum achieveable speed, whereas with thrust compounding, axial thrust provides additional propulsive force. The concept of compounding is not new but recently there has been a resurgence of interest in the configuration due to the emergence of new requirements for speeds greater than those of conventional helicopters. The aim of this paper is to investigate the dynamic stability characteristics of compound helicopters and compare the results with a conventional helicopter. The paper discusses the modelling of two compound helicopters, with the first model featuring a coaxial rotor and pusher propeller. This configuration is known as the coaxial compound helicopter. The second model, known as the hybrid compound helicopter, features a wing and two propellers providing thrust compounding. Their respective trim results are presented and contrasted with a baseline model. Furthermore, using a numerical differentiation technique, the compound models are linearised and their dynamic stability assessed. The results show that the frequency of the coaxial compound helicopter’s dutch roll mode is less than that of the baseline helicopter and there is also greater roll damping. With regards to the hybrid compound helicopter the results show greater heave damping and the stabilisation of the phugoid due to the addition of the wing and propellers

Breaking the rules: Summer camping experiences and the lives of Ontario children growing up with polio in the 1940s and 1950s

This chapter presents an analysis from a critical disability studies history framework developed for a research project. It discusses how the research was conducted using an oral history method and how the analysis was produced. Oral history narratives of individuals living with polio are viewed as the most appropriate and important way to learn about and understand the meaning of polio for Canadians during the time period of 1927–1957. The chapter provides a historical backdrop to describe the development of some Ontario Society for Crippled Children (OSCC) camps, the philosophic basis for the camps, and the intended goals of the camping program. It deconstructs the philosophy of the OSCC, and presents some overarching themes. Each of the themes illustrates an aspect of the ableist dominant view of disability in relation to understandings of disabled children's lives at that time. The chapter introduces the counter narratives of the participants who attended these camps and their everyday lived experiences

Learning in the Panopticon: ethical and social issues in building a virtual educational environment

This paper examines ethical and social issues which have proved important when initiating and creating educational spaces within a virtual environment. It focuses on one project, identifying the key decisions made, the barriers to new practice encountered and the impact these had on the project. It demonstrates the importance of the ‘backstage’ ethical and social issues involved in the creation of a virtual education community and offers conclusions, and questions, which will inform future research and practice in this area. These ethical issues are considered using Knobel’s framework of front-end, in-process and back-end concerns, and include establishing social practices for the islands, allocating access rights, considering personal safety and supporting researchers appropriately within this contex

Development of hazard analysis and critical control points (HACCP) procedures to control organic chemical hazards in the agricultural production of raw food commodities

Hazard Analysis by Critical Control Points (HACCP) is a systematic approach to the identification, assessment and control of hazards in the food chain. Effective HACCP requires the consideration of all possible hazards, i.e., chemical, microbiological and physical. However, current procedures focus primarily upon microbiological and physical hazards, and, to date, chemical aspects of HACCP have received relatively little attention. Consequently, this report discusses the application of HACCP to organic chemical contaminants and the particular problems that are likely to encounter within the agricultural sector. It also presents generic templates for the development of organic chemical contaminant HACCP procedures for selected raw food commodities, i.e., cereal crops, raw meats and milk

Surface phenomena in plasma environments

Plasma interactions and their effects on materials depend on a number of factors, including the pre-existing environment, the properties of surface materials and the characteristics of the system. An additional dimension is the question of mission: some payloads may be much more sensitive to plasma interactions than others. As an example, a payload whose objective is to measure the ambient environment will be more sensitive to any effects than will a power system. Material specific effects include charging and its associated effects, which can result in short- and long-term damage. Selection of materials for a particular application requires consideration of all factors and assessment of effects due to all causes. Proper selection and suitability determination requires analysis to identify the actual environment combined with testing under exposure to single and combined environment factors

EVIDENCE OF COMMUNAL OVIPOSITION AND NEST ABANDONMENT IN THE NORTHERN TWO-LINED SALAMANDER (EURYCEA BISLINEATA, (GREEN, 1818)) IN NORTHEASTERN CONNECTICUT

Most plethodontid salamanders oviposit their eggs in an individual nest and attend the clutch until hatching. Here, we describe aspects of the reproduction of Eurycea bislineata (Northern Two-lined Salamander) from three field sites in northeastern Connecticut that contrast with the typical plethodontid reproductive behavior. Rocks used as oviposition sites contained up to 296 eggs, with an average of more than 100. These numbers exceed the maximum ovarian egg counts for this species, indicating that communal oviposition is common. The lack of correlation between rock size and number of eggs, as well as the lack of discrete clutches when eggs are laid in large clusters, suggests that communal oviposition may be caused by something other than nest site limitation. Additionally, the rate of maternal attendance at nests was low. Thus, communal oviposition with high rates of nest abandonment is the dominant reproductive strategy in E. bislineata at these sites

Synthesis and characterisation of Fe₆ and Fe₁₂ clusters using bicine

Reaction of bicine {BicH3, N,N-bis(2-hydroxyethyl)glycine} with an Fe(III) oxo-centered pivalate triangle in MeCN in the presence of Et<sub>2</sub>NH yields [Et<sub>2</sub>NH<sub>2</sub>]<sub>2</sub>[Fe<sub>6</sub>O<sub>2</sub>(OH)<sub>2</sub>(Bic)<sub>2</sub>(O<sub>2</sub>CCMe<sub>3</sub>)<sub>8</sub>], which possesses an S = 5 ground state. Changing the base to NaOMe produces [Fe<sub>12</sub>O<sub>4</sub>(Bic)<sub>4</sub>(HBic)<sub>4</sub>(O<sub>2</sub>CCMe<sub>3</sub>)<sub>8</sub>], which contains two Fe6 units bridged by the carboxylate arms from the bicine ligands. The complex displays strong antiferromagnetic coupling leading to an S = 0 ground state

Biological implications of a discrete mathematical model for collagen deposition and alignment in dermal wound repair

We deveiop a novel mathematical model for collagen deposition and alignment during dermal wound healing. We focus on the interactions between fibroblasts, modelled as discrete entities, and a continuous extracellular matrix composed of collagen and a fibrin based blood clot. There are four basic interactions assumed in the model: fibroblasts orient the collagen matrix, fibroblasts produce and degrade collagen and fibrin and the matrix directs the fibroblasts and determines the speed of the cells. Several factors which influence the alignment of collagen are examined and related to current anti-scarring therapies using transforming growth factor ß. The most influential of these factors are cell speed and, more importantly for wound healing, the influx of fibroblasts from surrounding tissue

Visual Search for Galaxies near the Northern Crossing of the Supergalactic plane by the Milky Way

We have visually examined twelve Palomar red Plates for galaxies at low Galactic latitude b, where the Supergalactic Plane (SGP) is crossed by the Galactic Plane (GP), at Galactic longitude l ~135 degrees. The catalogue consists of 2575 galaxy candidates, of which 462 have major axis diameters d >= 0.8 arc min (uncorrected for extinction). Galaxy candidates can be identified down to |b| ~ 0 degrees. One of our galaxy candidates (J24 = Dwingeloo 1) has recently been discovered independently in 21cm by Kraan-Korteweg et al. (1994) as a nearby galaxy. Comparisons with the structures seen in the IRAS and UGC catalogues are made. We compare the success rate of identifying galaxies using the IRAS Point Source Catalogue under different colour selection criteria. The criteria that require both the 60 micron and 100 micron fluxes to be of high quality, have the highest probability of selecting a galaxy (with d >= 0.6 arc min), but at the expense of selecting a smaller number of galaxies in total.Comment: uuencoded compressed postscript, without figures. The figures are available at http://www.ast.cam.ac.uk/preprint/PrePrint.htm